The CALMINI Slip Yoke Eliminator kit allows you to use a 2 piece rear driveshaft on your Nissan.  Will all for a Spicer 1310 & 1330 U-joint or C.V. Joint patterns. Complete kit comes with assembled slip yoke eliminator, four(4) Grade 8 driveshaft mounting bolts, one(1) Grade 8 output shaft mounting bolt, lock washers, and Loc-Tite.  Minor modification to rear output shaft required. Comes installation instructions for an at home installation.

This is the factory stuff! This clutch type unit features precise torque loading and puts the power to the ground by eliminating the traction loss of a spinning opposite wheel. The design of this unit incorporates a progressive rate of slippage that delivers a predicable on and off-road performance and reduced drive line component stress. Translation: It generally won't break axles or CV's! This is the perfect compliment to your Frontier for trail riding and rock crawling.  A perfect match to go with the CALMINI transfer case gears.

Finally, a true ROCKCRAWLER transfer case gear set for for the Nissan D22 Frontier 4x4! Our gear set is manufactured in the USA from SAE 8620 alloy bar stock material. For long wear life and operation at high speeds nothing else is acceptable. This gearset provides a final low range reduction of 3.92:1, which is a whopping 93.86% lower than stock!  It completely transforms this vehicle's off road crawl capability and enables it to perform much better in heavy off-road use situations.  This gearset will fit all Nissan TX-10 transfer cases available in all Nissans worldwide.  The complete gearset comes with precision machined counter-gear, input gear, and output gear, billet machine retainer ring and bearing as well as two(2) quarts of Valvoline 80W90 gear oil and Permatex RTV silicone gasket maker.