The POWERAID TBS concept was developed to enhance mid-range power, torque and fuel efficiency. The unique dyno-proven "Helix Bore" of the POWERAID TBS causes a spinning action of the incoming air-charge as it passes through the throttle body. This extremely beneficial air-charge carries all the way into the combustion chamber, producing a super-atomized mixture, which produces tremendous gains in mid-range power and overall efficiency. This is the key element to the horsepower success behind each POWERAID TBS.

The first step in upgrading your car's performance is to replace the restrictive stock air box with a STILLEN Hi-Flow Intake. Additional air flow increases the engine's efficiency and power output by increasing the quantity of the air/fuel ratio. The STILLEN Hi-Flow consists of a either a precision machined ring and a gauze element (cleanable) filter or the newer K&N cone filters which incorporate a velocity stack which uses the venturi effect to accelerate air intake speed. Power and throttle response will improve throughout the entire RPM range. Your best dollar-per-horsepower investment by far! Most people find the authoritative note of the intake pleasing, but note that increased noise levels will result. Most STILLEN Hi-Flow Intakes are CARB Approved, while others are currently CARB Pending, and may not be 50 state legal until approved. Clean your filter regularly for best results.

S&B Filters has been providing technological advancements for the high performance air filter market for over 30 years. See how our products can help you get the most out of your vehicles.

A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include replacing the factory intake plenum with an aluminum plenum, eliminating resonators, air box, drop in filter, and replacing it with an open filter element. These key differences allow the vehicle to bring in more air into the intake chamber and create more horsepower and torque. Vacuum and in some cases air mass sensors, are still maintained and incorporated into the Fujita Short Ram Intake. Since a vehicle is constantly moving (except during traffic or at a light) heat soak will be of little issue since the car will constantly be bringing in fresh air. In addition, studies have shown that the material used to build the intake system has shown no loss of horsepower due to an intake being rubber, aluminum, ceramic coated, anodized, etc.

AIRAID Intake Systems are specifically designed to take full advantage of today's vehicle technology. Our performance success story is really quite simple - we use the latest dyno-proven techniques and innovative designs to improve upon intake system efficiency. Therefore, the greater the efficiency level, the greater the horsepower output!

Our unique inlet track and filter combination is substantially less restrictive when compared to production type OEM airboxes. In fact, air flow/cfm (cubic feet per minute) is dramatically improved up to 20% with our intake systems. The higher your engine's air flow, the greater its efficiency and horsepower output will be. Our dyno-testing has resulted in gains as high as 18 horsepower, with no other changes or modifications!

AEM designs its BRUTE FORCE intakes for popular trucks, SUVs and late-model, fuel injected musclecars, and dyno-tunes each system to create more torque and horsepower than any other intake for large displacement engines. We test against the competition, and won’t release a system unless it outperforms all other offerings.


Application(s):

04-08 Infiniti QX56 5.6L
04-08 Nissan Armada 5.6L
04-08 Nissan Titan 5.6L

• Equip your vehicle with the Injen Power-Flow-the world's first cold air intake that's truly custom-tuned for the drivetrain in your specific year, make and model
• Injen spent a decade developing their Mega Ram (MR) Technology—a sophisticated tuning process that allows Injen to tweak the diameter and shape of the intake pipe for the greatest horsepower and torque gains
• Each vehicle goes through a thorough dyno-testing process to ensure maximum performance
• The first step along the Power-Flow Cold Air Intake's pathway to power is the high-flow air filter, with its fully integrated Air Inducer, Air Stabilizer and Velocity Stack
• The Power-Flow Cold Air Intake's air filter is engineered to pull in more oxygen, strip out turbulence and pressurize it to the ideal level
• The inline calibration intake of your Injen Power-Flow Cold Air Intake controls the air speed and releases it through the mass air flow sensor at precisely calculated intervals
• All of the advanced designs on your Injen Power-Flow Cold Air Intake deliver fierce acceleration, lighting-fast throttle response and consistent power gains across the entire RPM range
• Its tuned tube is wrought from aerospace-grade, lightweight, anti-corrosive T-6 aluminum
• Some vehicles include a Power Box heat shield along with the Power-Flow Cold Air Intake
• Your Injen Power-Flow Cold Air Intake is CARB pending
• Simple bolt-on installation that requires no drilling
• Injen backs your Power-Flow Cold Air Intake's tube and filter with a Lifetime Warranty